| > Sand unit MS 400 x
130 - England |
|
 |
> Double cycloning plant
100 t/h
- la Martinique |
|
 |
> sand unit MS 200 x
60
- final fitting in workshop |
|
|
|
 SAND
UNITS
Designed to ensure a liquid/solid
separation by cycloning/dewatering
PERFORMANCE
• In general applications, an MS Sand Unit
produces a -4 mm washed sand in accordance
with applicable concrete sand standards.
Depending on the unit size, the slurry flow can
reach 1200 m3/h and produce up to 300 t/h of
washed sand.
• In more demanding applications,
e.g.where there
is a high degree of pollution, or for specific
productions or higher tonnages, MS is able to
propose an individual solution corresponding to
the customer's specific request by combining
several Sand Units either in parallel or in series.
Anti-abrasion protection :
• Special rubber lining of :
- Pump parts,
- Hydrocyclone inner parts,
- Steelwork and steel parts subject to abrasion,
- Discharge pipes,
• Dewaterer modular panels
in polyurethane
• Choice of impeller and pump
lining depends on
the characteristics (crushed or natural, size..) of
the sand to be processed and on the working
conditions.
| |
Field of application
:
The MS Sand Units typical applications are
in :
• Gravel & concrete sand industries,
But they are also widely used in :
• The
production of industrial sands,
• The
desanding of bentonitic slurries used by
TBMs,
• The treatment of polluted soils
(rehabilitation
of industrial sites, mineral pollutions, etc.).
Modular design :
The MS range of Sand Units is built up by
combining one of each of the following main
components :
• 4 models of pumping tank,
• 6 sizes of sand pumps, WARMAN or equivalent,
chosen for their resistance to abrasion, and their
performance,
• 6 types of high performance
cyclones designed to
ensure a cut between 40 and 70 µm,
•
8 types of vibrating dewaterer equipped with modular
polyurethane panels with slotted openings.
The MS Sand Units comply with CE standards
of personnel safety and ergonomics.
Safety :
The MS Sand Units comply with CE standards
of personnel safety and ergonomics.
|
|
|
;)
;)
;)
