 |
> Patented cake take
out system
by pneumatic jacks |
|
 |
| > compact filter-press
7m3 volume |
|
|
|
 SLUDGE
PRESSING : FILTER PRESS
The compact filterpresses are
designed to de-hydrate sludges
to ease transport, storage or valorization.
Quality :
• Well-known brand of high quality
componants :
polypropylene plates, polyamid cloths, hydraulic
unit,
PLC and other regulation accessories,
•
High performance hydraulic unit.
• PLC,
• Manufacture and final fitting by MS in its
workshop.
Installation on Site :
• The installation, the start-up and
the follow-up of MS
filter-presses is performed by MS personnel, in
order to
ensure the full satisfaction of our customers,
• The MS Filter-presses can be installed in
a separate
container, in a specific building, or on concrete
walls.
MS also proposes the most suitable sludge pumping
section :
- Volumetric or centrifugal pumps,
- Possible addition of filtration booster (polymer,
lime...)
- Storage silos, air, sludge & electricity networks.
- Thickener
- Sludge silo
- Feed pump
- Set of filtration plates, chambered , membranes
or mixed type
Safety :
• Full protection by optical barrier,
and metallic covers,
• Conformity with
applicable EC standards.
Over 25 years, MS has acquired a significant experience
in
the design and manufacture of mineral treatment
plants
using wet processes such as hydraulic separation,
cycloning,
flocculation, coagulation, sedimentation, pumping...
The MS Filter-presses are the logical continuation
of such
processes. For each project, in its laboratory,
MS studies the
sludge filtrability, performs tests on samples,
extrapolates the
key figures to determine the proper sizing of the
filter-press
and design its installation within the general process.
|
Fields of applications
:
The MS FILTER-PRESSES are mainly used in
:
• mineral industries, for the treatment
of clays, kaolin and
other minerals,
• quarries and sand pits,
after the flocculation & thickening
section,
• stone cutting industries,
• underground work, for the treatment of bentonitic
sludges,
• environmental industries, for
the final compacting of
sludges and wastes (slops, concrete grouts, polluted
soils...).
Design & Manufacture :
MS has based its range of filter-presses
on the following
criteria :
• Polyvalence :
- 4 sizes of plates : 630-800-1200-1500
mm,
- 8 to 16 bars,
- Chambered, membranes or mixtes.
• Reliability
:
- Compact and hyper-rigid
mechanical frame,
- Patented cake release system by independant pneumatic
jacks, avoiding any moving mechanical part.
• Efficiency :
- High performance due to the reduction of dead
time,
opening, closing, sludge feed, cake releaseÉ
- Full automatization of the cycles. |
|
|
;)
;)
;)
